Low Voltage Controller with Dimming
LVPC

(LVPC-DIM)

Now patient rooms can easily incorporate dimmed lighting with single-button control found at most patient bedsides.

The LVPC-DIM module from Oldenburg Electronics enables on/off/dimming control of two AC powered lighting loads and on/off control of a third AC load via low-voltage, momentary contact switches—such as those found on patient pillow speakers, bed communication side rails, and nurse call auxiliary outputs. Dimmable loads can be controlled using a single button for both switching and dimming; a short press turns the load on and off while a held press dims the load up and down.

Only a single switch is required for full control of each load, allowing use of existing patient controls and simple momentary wall switches.

• Wide-range 120-277VAC, 50/60Hz input
• Can be used with fluorescent, LED, and other lamp types (dimmable ballasts or drivers required for dimming functionality)
• One control switch or contact required per load. Additional switches/contacts may be wired in parallel to permit control from multiple locations.
• Simple field configuration using DIP switches for following modes of operation:
  • Two loads with 0-10V dimming and a 3rd load independently
  • Two loads with 0-10V dimming and a 3rd load that deactivates the first two loads when on
  • Two loads with 0-10V dimming and a 3rd load that also turns on the second load at full output when on
  • Two loads with 0-10V dimming and a 3rd load that also turns on the first two loads at full output when on